Products |
Direct Application / Sales Support E-Mail - morgan@dcsunvolt.com Telephone - (973) 670-0201 |
Your Source for DC ON LOAD Disconnects and Combiner Boxes.... |
|
According to the new 2011 NEC code – 690.16 (B):“Fuse Servicing. Disconnection means shall be installed on PV output circuits where over current devices (fuses) must be serviced that cannot be isolated from energized circuits. The disconnecting means shall be within sight of, and accessible to, the location of the fuse or integral with fuse holder.” Further information can be found in the following articles from the 2011 April/May edition of Solar Professional Magazine: The New NEC 69016 (B) Fuse Servicing Requirements & Combiner Boxes and Code Red: Notable Changes to the 2011 NEC |
|
Manually Disconnects Four Solar Panels at the Source Eliminating Any Electrical Hazard. - ON LOAD Disconnect - 4 Individual Poles - 25 AMPS - Compact Design - Pad lockable Handle - 600VDC - UL508
|
Manually Disconnects Single or Multiple Lower Amperage DC Circuits - ON LOAD Disconnects - 1, 2, 3 or 4 Poles - 16, 25 & 32 AMPS - Compact Design - Pad lockable Handle - 600VDC - UL508 |
Used to Turn Off Single DC Circuit Anywhere Between the PV Panels to the Inverter.- ON LOAD Disconnects - Single Pole - 100, 200 & 400 AMPS - Visual Breaking Indicator - Direct or Extended Handle - 600VDC - UL98 |
Used to Turn Off Two DC Circuits Anywhere Between the PV Panels to the Inverter.- ON LOAD Disconnects - Double Pole - 400 & 600 AMPS - Visual Breaking Indicator - Direct or Extended Handle - 600VDC - UL98 |
Combines Multiple Solar Panel Stringers into One 2 Wire Output.Touch Protected; Standard or Custom Panels are Offer UL508 Approval. - 6, 12, 18, 24 Stringers or Custom Qty.
|
On Load DC Disconnect Switches Turn Off Power Before the Panel Door Can be Opened, Preventing Dangerous Access to High Voltage 600VDC. - Same features as our standard Solar Combiner Boxes
|
ON LOAD AC Disconnect Switches Turn Off Power after the Inverter; Rated UL98 these Switches are Suitable for Service Entry Applications. - 30 to 1,200 Amps - Fusible & Non-Fusible - Direct or Extended NEMA 4X Handle - 3 & 4 Pole Configurations - 600VAC - UL98
|
Molded Case Circuit Breakers Disconnects Power and Provides Circuit Protection. Many versions and Options Available.
- 15 to 800 Amps 240 to 600VDC - Fixed or Adjustable Trip - Remote Trips Offered - Extended or Flange Handles - Many Options Available - UL489 Branch Circuit Protection |